Instructions for assembling a hookah Black Pearl

Before the first use, be sure to rinse all parts and accessories of the hookah. We recommend that you clean all holes and threaded connections with a brush using baking soda; Rinse the vase and hose with running water.

Start collecting the hookah should be from the bottom and move up.

• The immersion part (item 12) is screwed into the base (item 10) through hole 2. Purge balls are inserted into the holes 1 of the base (item 10);
• Then screw the upper part of the pipe (part 8) into the base (part 10);
• Then, on the upper part of the pipe (part 8), put in turn the lining elements (parts 4-7), the spacer ring (part 14) and the protective tray (part 3); A bowl connector (item 2) is screwed into the upper part of the pipe (part 8), securing the tray; A seal is put on top of the connector (part 1);
• The hose connector (item 9) is inserted into the side hole of the base (item 10);
• Put the seal for the vase (part 11) on the base (part 10);
• A diffuser (part 13) is screwed into the submersible part of the pipe (part 12);
• To start smoking, insert the pipe into a vase filled with water. The lower part of the pipe should be 1-2 centimeters immersed in water. A silicone hose with a mouthpiece is inserted into the hose connector. Hookah “Black Pearl” is fully assembled.

By changing the position of the ball (details 5 and 6), it is possible to change the direction of the smoke: up – towards the tray and down, directing the flow of smoke over the top of the vase.

IMPORTANT!!! To make the hookah last as long as possible, we recommend rinsing the hookah pipe with running water after each smoking session; wash all holes and threaded connections no more than once a month with daily smoking; dry the hookah well after washing.

Happy using!